project case study

---

This case study focuses on the integration of weighing scales into a Manufacturing Execution System (MES) in pharmaceutical industries. The purpose of this integration is to provide real-time data on the weight of raw materials and products to ensure compliance with regulatory requirements. 

Integrating a weighing scale with an MES system allows for accurate measurements and traceability of the production process. The following steps should be taken for integrating a weighing scale with an MES system :

1. Connect the weighing scale to the MES system: This can be done using an Ethernet connection. We can use Serial to Ethernet converter when ethernet port is not available in weighing scale.
2. Configure the weighing scale & Converter: This includes setting up the scale’s parameters and Serial to Ethernet converter parameter’s such as Baud rate, parity, Data/stop bit for serial configuration and IP address, Subnet mask, Gateway & DNS, port setting for Ethernet connection.
3. Configure the MES system: This includes setting up the MES system’s parameters such as the data points to be collected and the data format. Our team will work with MES team to format the weigh information in weighing scale which are need for MES, if required.
4. Test the integration: This is done to ensure that the integration is functioning properly and that the data is being collected and stored accurately.  

The integration of a weighing scale with an MES system provides several benefits to a pharmaceutical production process, including :

1. Accuracy – Integrating a weighing scale with an MES system ensures accurate measurements and traceability of the production process. 
2. Efficiency – Integrating a weighing scale with an MES system reduces the time required to collect and store data, increasing the efficiency of the production process. 
3. Compliance – Integrating a weighing scale with an MES system ensures compliance with regulatory requirements, such as Good Manufacturing Practices (GMP).